Calculate cubic yards, formwork, and rebar quantities in minutes. Tectonic reads structural plans and generates accurate concrete takeoffs automatically.
Manual takeoffs waste your time and cost you money. Sound familiar?
Footings, walls, slabs, columns - each with different dimensions. Calculating cubic yards across a project requires careful math that's easy to get wrong.
Form-to-pour ratios vary by element type. Walls, columns, and footings each require different contact area calculations for accurate forming costs.
Bar sizes, spacing, lap lengths, and hook allowances - rebar takeoffs require attention to detail that takes hours and is easy to underestimate.
Different slab finishes, embedded anchors, sleeves, and waterstops add complexity that's scattered across architectural and structural drawings.
AI-powered takeoffs that work the way you think.
AI calculates concrete volumes for footings, walls, slabs, columns, and grade beams. Quantities separated by element type and concrete mix requirements.
Calculate form contact area for all concrete elements. Tectonic identifies element types and applies appropriate form-to-pour calculations.
Quantify reinforcing steel by bar size, including standard lap lengths and waste factors. Export in tons or linear feet based on your pricing needs.
Track square footage by finish type (broom, trowel, exposed), plus anchor bolts, embeds, and other accessories for complete estimates.
Everything you need to know about concrete estimating with Tectonic.
Tectonic reads dimensions from structural plans and calculates volumes using geometry formulas. It handles rectangular, circular, and irregular shapes, separating quantities by element type.
Yes. Tectonic applies standard waste factors (typically 3-5% for flatwork, higher for small pours) which you can adjust based on your experience and site conditions.
Absolutely. Tectonic provides rebar quantities in both linear feet (for ordering and fabrication) and tonnage (for cost estimating). You can switch between units as needed.
Tectonic allows you to assign different mix designs to different elements. Track PSI requirements, special admixtures, or architectural vs. structural concrete separately.
Yes. While optimized for cast-in-place concrete, Tectonic can also assist with ICF, tilt-up, and precast takeoffs by quantifying wall areas and volumes.
Join contractors who are cutting their takeoff time by 90% and winning more profitable work.
No credit card required. Upload your first plans in minutes.