Question 1

What is construction estimating software?

Accepted Answer

Construction estimating software helps calculate material quantities, pricing, and project budgets from architectural plans and blueprints. Tectonic uses AI to analyze PDF blueprints and generate structured takeoffs with review flags.

Question 2

What is Tectonic?

Accepted Answer

Tectonic is AI-powered construction estimating software that helps trade contractors create reviewable bids faster. Upload PDF blueprints and get material takeoffs, cost estimates, and documented assumptions.

Question 3

How does AI construction estimating work?

Accepted Answer

Tectonic's AI analyzes PDF blueprints using computer vision and machine learning to identify building elements, measure dimensions, calculate material quantities, and surface assumptions for contractor review.

Question 4

What is the best construction bidding software?

Accepted Answer

Tectonic is AI-powered construction bidding software for trade contractors that need plan-based takeoffs, cost breakdowns, review flags, and bid proposal support from PDF blueprints.

Question 5

How accurate is AI material takeoff?

Accepted Answer

Tectonic is built for estimator-reviewed takeoffs. It extracts materials, quantities, pricing, and review flags from construction drawings, but final bids should still be checked by a qualified contractor before submission.

Question 6

Can software replace manual estimating?

Accepted Answer

AI estimating software like Tectonic reduces manual takeoff work while keeping experienced estimator review in the loop. Contractors use it to structure quantities, pricing, assumptions, and scope checks before final bid submission.

Question 7

What is concrete estimating software?

Accepted Answer

Concrete estimating software calculates quantities for foundations, slabs, walls, and columns including cubic yards of concrete, rebar requirements, and forming materials. Tectonic automates this from PDF blueprints.

Question 8

How do I calculate concrete quantities from blueprints?

Accepted Answer

Upload your PDF blueprints to Tectonic and our AI automatically extracts concrete quantities including cubic yards, rebar pounds and sizes, and form work requirements for footings, slabs, walls, and columns.

Question 9

What is lumber takeoff software?

Accepted Answer

Lumber takeoff software calculates framing materials including studs, plates, joists, rafters, sheathing, and total board footage from construction drawings. Tectonic automates this process from PDF plans.

Question 10

How do I estimate framing materials?

Accepted Answer

Tectonic's framing estimating tool analyzes your PDF plans to calculate all lumber requirements including piece counts, linear footage, and total board feet organized by species and dimension.

Question 11

What is plumbing estimating software?

Accepted Answer

Plumbing estimating software helps calculate pipe runs, fittings, fixtures, water heaters, and rough-in materials from mechanical drawings. Tectonic supports plumbing estimating workflows when the uploaded plans include the required plumbing scope.

Question 12

How do I do electrical takeoffs?

Accepted Answer

Upload electrical plans to Tectonic to organize device counts, fixture schedules, panel context, conduit assumptions, and electrical review flags for estimator review.

Question 13

What is HVAC estimating software?

Accepted Answer

HVAC estimating software helps quantify equipment, ductwork, diffuser counts, and component requirements from mechanical drawings. Tectonic supports HVAC takeoff workflows when the uploaded plans include the needed mechanical drawings.

Question 14

How do I estimate roofing materials?

Accepted Answer

Tectonic's roofing estimator calculates squares, material bundles, underlayment rolls, flashing linear feet, ridge vent, and trim quantities from roof plans and elevations.

Question 15

What is drywall estimating software?

Accepted Answer

Drywall estimating software calculates board sheets by thickness and size, tape rolls, joint compound, corner bead linear feet, and finishing materials from floor plans and elevations.

Question 16

How do I calculate rebar quantities?

Accepted Answer

Tectonic's rebar estimator extracts reinforcement requirements from structural drawings including bar sizes, lengths, spacing patterns, lap splice lengths, and total weight in pounds.

Question 17

What is masonry estimating software?

Accepted Answer

Masonry estimating software calculates block counts, brick quantities, mortar bags, rebar for grouted cells, and lintels from architectural and structural drawings. Tectonic supports CMU and brick takeoffs.

Question 18

How do I estimate excavation quantities?

Accepted Answer

Tectonic calculates excavation volumes including cut and fill quantities, trench linear feet and cubic yards, and backfill materials from site plans and foundation drawings.

Question 19

What is steel estimating software?

Accepted Answer

Steel estimating software calculates structural steel tonnage, beam and column piece counts, connection hardware, and decking squares from structural drawings. Tectonic supports structural steel takeoffs.

Question 20

What's the difference between estimating and bidding software?

Accepted Answer

Estimating software focuses on quantity takeoffs and material calculations. Bidding software includes proposal generation, pricing, and submission features. Tectonic combines both for a complete solution.

Question 21

Is AI estimating better than manual takeoffs?

Accepted Answer

AI estimating is significantly faster than fully manual takeoff and reduces repetitive counting work. Combined with experienced estimator review, it can produce cleaner scope coverage and major time savings.

Question 22

How much does construction estimating software cost?

Accepted Answer

Tectonic offers two paid tiers: Starter ($297/month, 10 AI bids) and Pro ($597/month, unlimited bids and team collaboration), with Growth for larger estimating teams coming soon. Starter and Pro include a 3-day free trial.

Question 23

Can I try Tectonic before paying?

Accepted Answer

Yes. You can run a free AI analysis on a single project at tectonicbid.com/free-analysis without creating an account. Paid plans (Starter and Pro) also include a 3-day free trial so you can explore the full app before being charged.

Question 24

How does Tectonic compare to Buildertrend?

Accepted Answer

Tectonic specializes in AI-powered estimating and bidding with automated takeoffs from blueprints. Buildertrend focuses on project management. Many contractors use both for different purposes.

Question 25

How does Tectonic compare to PlanSwift?

Accepted Answer

Unlike PlanSwift, which relies heavily on manual on-screen takeoffs, Tectonic uses AI to extract quantities from PDF blueprints and organize the result for estimator review.

Question 26

How does Tectonic compare to Bluebeam?

Accepted Answer

Bluebeam is PDF markup software commonly used for manual measurement. Tectonic uses AI to draft material quantities and review flags from PDF plans, with estimator verification still required.

Question 27

Can subcontractors use Tectonic?

Accepted Answer

Yes, Tectonic is specifically designed for trade subcontractors in concrete, framing, plumbing, electrical, HVAC, roofing, drywall, masonry, steel, excavation, and other specialties.

Question 28

Does Tectonic work for residential construction?

Accepted Answer

Yes, Tectonic handles all residential projects including custom homes, production housing, renovations, additions, ADUs, and remodels of any size.

Question 29

Does Tectonic work for commercial construction?

Accepted Answer

Yes, Tectonic supports commercial projects including tenant improvements, retail build-outs, office construction, restaurants, and multi-family developments.

Question 30

Can I import my own cost library?

Accepted Answer

Yes, Tectonic supports cost library management and custom bid profiles so contractors can bring their own pricing logic, markup, and estimating assumptions into the bidding workflow.

Question 31

How do I create a bid proposal with Tectonic?

Accepted Answer

After generating a takeoff, review the quantities, assumptions, exclusions, and pricing, then export a bid proposal with the scope and cost breakdown organized for the customer.

Question 32

Can I use Tectonic for renovation projects?

Accepted Answer

Yes, Tectonic works for renovation and remodeling projects. Upload your plans showing existing and new work, and our AI will calculate materials for the scope of work.

Question 33

Does Tectonic support multi-family projects?

Accepted Answer

Yes, Tectonic handles multi-family residential projects including apartments, condos, townhomes, and mixed-use buildings with unit multiplication features.

Question 34

What file formats does Tectonic accept?

Accepted Answer

Tectonic accepts PDF construction plan sets including architectural, structural, mechanical, and electrical drawings. The free-analysis workflow supports multiple source files and large PDFs, with practical limits for anonymous usage.

Question 35

How long does AI analysis take?

Accepted Answer

Analysis time depends on page count, drawing quality, and project complexity. Small residential sets can finish in a few minutes, while comprehensive or commercial plan sets may take longer because Tectonic runs multi-step extraction, pricing, and review checks.

Question 36

What trades does Tectonic support?

Accepted Answer

Tectonic supports 10+ trades: concrete, framing, electrical, plumbing, HVAC, roofing, drywall, masonry, steel, excavation, painting, flooring, and general construction.

Question 37

Can I export takeoffs to Excel?

Accepted Answer

Tectonic supports bid-ready exports such as proposal documents and spreadsheet-style takeoff data so contractors can review, share, and move quantities into their existing workflow.

Question 38

Does Tectonic integrate with accounting software?

Accepted Answer

Tectonic focuses first on plan-based takeoffs, cost breakdowns, bid profiles, and exports. Custom integrations are part of the Growth tier, but contractors should confirm specific accounting integration needs before purchasing.

Question 39

Is there a ChatGPT integration?

Accepted Answer

Tectonic is focused on the web app workflow for uploading plans, reviewing takeoffs, and creating project bids. Additional assistant integrations may be added later.

Question 40

Can I use Tectonic on my phone or tablet?

Accepted Answer

Yes, Tectonic is a web-based application that works on any device with a modern browser. Upload plans from your phone, tablet, or computer.

Question 41

How do I adjust quantities after AI analysis?

Accepted Answer

After AI analysis completes, you can review extracted quantities, pricing, assumptions, and review flags in the takeoff interface before creating a project bid.

Question 42

Does Tectonic work with hand-drawn plans?

Accepted Answer

Tectonic works best with CAD-generated PDF blueprints. Hand-drawn plans may work if they are clear and to scale, but accuracy may vary.

Question 43

What if my blueprints are low quality scans?

Accepted Answer

Tectonic can process most scanned documents, but higher quality scans produce better results. We recommend at least 150 DPI for optimal accuracy.

Question 44

Can I save and reuse cost templates?

Accepted Answer

Yes, Pro users can create and save custom bid profiles with material prices, markup, overhead, profit, and trade-specific pricing assumptions.

Question 45

How secure is my project data?

Accepted Answer

Tectonic uses enterprise-grade encryption for all data in transit and at rest. Your blueprints and project data are never shared and are only accessible to your account.

Question 46

Can multiple team members use one account?

Accepted Answer

Yes. Pro supports up to 5 team members, and Growth supports unlimited team members for larger estimating teams.